CNC Milling Machining
What is CNC Milling Machining?
A milling machine is capable of rotating the cutting tool to remove material from a workpieceraw by means of relative movement between various cutting tools and raw material rod. An automatic milling machine can be combined with specific operations, such as threading, boring, drilling, grooving, reaming, cutting, facing, parting, etc.
This kind of powerful machine is usually integrated with highly precision CNC control, coolant systems, translation/rotary systems, etc.
Apporo mainly operated with highly precision Japan and Taiwan milling center, such like Okuma, Takisawa Sunmill, Ares-seki, Takumi, Dahlih, etc, basically generalized into vetical and multi-axles machining centers for various purpose. Send us your project design, you will be impressived by our machining services.
Is my part a good fit for Milling?
Part featured with below is good to be run on a milling machine Center:
・Various flat surfaces
・Deep slots
・Threads
・Gear teeth or splines
・Complex profile
CNC Milling Equipment
| Milling Machine Centers | RPM | Capacity | |
| Okuma Mac Turn 250-W 5-Axis Horizontal Machining Center | 5,000 | 550 x 550 x 530 | |
| Takisawa NEX-110 L | 3,500 | ø400 x 657 | |
| Takisawa TC-20 L | 4,500 | ø250 x 640 | |
| Takisawa Mac-Vie | 4,500 | 600 x 350 x 465 | |
| Sunmill EX-308 L | 4,000 | ø260 x 530 | |
| Sunmill JHV-550 | 15,000 | 550 x 400 x 460 | |
| Sunmill JHV-710 | 15,000 | 710 x 460 x 560 | |
| Sunmill JHV-1020 | 15,000 | 1020 x 550 x 580 | |
| Sunmill JMV-1100 | 8,000 | 1100 x 600 x 600 | |
| Ares-Seiki R510 | 12,000 | 500 x 400 x 460 | |
| Ares-Seiki R6040 | 15,000 | 600 x 400 x 400 | |
| Max Drill MV-1400 | 10,000 | 1420 x 660 x 610 | |
| Takumi VMC-1000II | 8,000 | 1020 x 510 x 510 | |
| Takumi VMC-1000P3 | 8,000 | 1020 x 510 x 510 | |
| Dahlih MCV-1020 | 3,500 | 1020 x 550 x 560 | |
| Dahlih DL-MCV-1020BA | 8,000 | 1020 x 550 x 560 | |
| Dahlih DL-MCV-1020A | 6,000 | 1020 x 550 x 560 | |
| Dahlih DL-MCV-1250 | 4,500 | 1250 x 600 x 700 | |
